Homepage > Large Castings
An operator presses these prods at two points on the surface of the casting. The distance between these points is limited by the amount of current used. Current passes between these two points and the area under consideration is magnetized.Testing the casting is a long & tedious process. The prods check only a small portion of the casting at one time. So, the operator hasto ensure that the entire surface of the casting is covered. He can divide the surface using chalks or markers& then check each marked area &write the result of testing on the area. Generally power generators with 3000A to 4000A capacity are used for this purpose.
Besides, direct magnetization, these current generators can also be used for cable wrap magnetization. Cable wrap magnetization is used to generate longitudinal magnetic field in the part so that transverse defects can be detected.
The formulas for calculation of current for prod method & cable wrap magnetization are given is ASTM E1444 & ASTM E709.
suitable products
Standard MPI Machines
Engineered for precision and efficiency, the Standard Bench Type Magnetic Particle Testing Machine is suitable for entry level testing.
PLC Controlled MPI Bench
With PLC Controlled bench type Magnetic Particle Inspection Machine, you can accurately control the process parameters for reilable results.
Multidirectional MPI Bench
The ultimate solution for robust non-destructive testing, this machine offers multi-directional magnetization for inspection in all directions in one shot..
Demagnetizers
Demagnetizers stand as a key tool in maintaining excellence in production, with the flexibility to handle different materials and magnetism levels, coupled with energy-efficient and user-friendly design.
DIVE DEEPER: GET YOUR HANDS ON OUR PRODUCT BROCHURE!
Explore More, Discover Better!
- In-Depth Details
- Product Insights
- Expert Recommendations
Download Our Brochure Now!
Blogs
Coating Thickness Measurements by eddy current testing machine
Eddy Current Testing (ECT) is a non-destructive testing (NDT) method widely used to measure the thickness of non-conductive and conductive coatings over conductive substrates. This technique is especially useful for applications in aerospace, automotive, and...
Eddy Currents Application Testing Procedures
Eddy currents are electrical currents induced in a conductor by a time-varyingmagnetic field. Eddy currents flow in a circular pattern, but their paths are oriented perpendicular to the direction of the magnetic field. The Eddy current inspection method is a highly...
Magnaflux MPI Machine
PlC-Controlled MPI: Revolutionizing Non-Destructive Testing Magnaflux Magnetic Particle Inspection (MPI) is a key part of non-destructive testing (NDT). It helps find flaws on or near the surface of materials that react to magnets. PLC-controlled systems in Magnaflux...